|
|
|
03166-10Machinable collet for external clamping |
go back |
|
|
DescriptionMaterial:Clamp nut aluminium.
Collet steel.Version:Clamp nut hard anodised.Note:The contour of the workpiece to be clamped is machined into the collet.
The collet must be pre-tensioned at a setting of 15° before the workpiece contour is machined in.
By using the engraved degree numbers, the same tightening torque can always be achieved for secure clamping of the workpiece, even without a torque wrench.
The radial clamping travel of the collet 03166-10-01910 is 0.025 mm per 15° rotation. The recommended clamping travel is 0.07 mm. The maximum permissible clamping travel is 0.38 mm.
The radial clamping travel of the collet 03166-10-04950 is 0.05 mm per 15° rotation. The recommended clamping travel is 0.1 mm. The maximum permissible clamping travel is 0.64 mm.
The positioning collar enables a precise seat.
Workpiece repeat accuracy: ± 0.02 mm.Type of operation:The clamp nut is tightened using a hook wrench.Technical data:See technical information.Supplied withForm A: Machinable collet consiting of clamp nut and collet.
Form B: Collet.
Including cap screws for fastening the collet. (metric and inch)Drawing reference:Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Other items in this category |
|
| Quick order / Check availabilityOrder article directly or check availability.display |
|
