{"product":{"productId":"agid.16075","price":11.92,"name":"Insert bearing UC"},"currency":"EUR"}
Matière
Ball-bearing steel 100Cr6.
Seal, rubber NBR.
Seal, rubber NBR.
Finition
Sealed on both sides with a spherical outer ring.
Can be re-lubricated.
Can be re-lubricated.
Afficher plus
Afficher moins
Description
Matière
Ball-bearing steel 100Cr6.
Seal, rubber NBR.
Seal, rubber NBR.
Finition
Sealed on both sides with a spherical outer ring.
Can be re-lubricated.
Can be re-lubricated.
Nota
The internal construction of the insert bearings corresponds to that of standard Series 6200 and 6300 radial ball bearing. However, they have wider inner rings for easier fastening on shafts. The inner rings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with h-tolerances. The shaft is secured by 2 grub screws positioned 120° apart on the inner ring.
The insert bearings are ready to install and are permanently lubricated with a suitable ball bearing grease. In normal applications, re-lubrication is not necessary.
The insert bearings are ready to install and are permanently lubricated with a suitable ball bearing grease. In normal applications, re-lubrication is not necessary.
Plage de température
-15 °C to +100 °C.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
