Linear ball bearing with internal runner aluminium silver anodised 21329-160390100
- Mini telescopic rails
- Smooth running
Unité de vente
€17.66
hors TVA
Ajouté à votre panier
Désignation
Palier linéaire à billes
Modèle 1
avec chariot interne
Matériau
du corps de base
aluminium
Surface
du corps de base
anodisé
Coloris
du corps de base
argent
B=Largeur
16
H=Hauteur
6
L=Longueur
100
S1=Chariot
39
C0Y
N
49
C0Z
N
18
Course
S
52
L1
4,5
L2
38
L3
76
L4
10
L5
19
Taille
16
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Rails aluminum.
Ball cage and balls steel.
Ball cage and balls steel.
Version
Rails silver anodized.
Ball cage galvanised.
Balls hardened.
Ball cage galvanised.
Balls hardened.
Note for ordering
Sold individually.
Note
Linear ball bearing consisting of a guide rail and a race which runs within the ball cage in the guide rail. The preferred installation position is vertical.
The specified load capacities refer to the maximum value at 50,000 cycles.
The internal stops limit the cage. Provide external stops for a loaded system.
The head height of the mounting screws should not exceed a height of 0.9 mm, otherwise there is a risk of collision with other linear ball bearing parts.
Recommended screws: M 2.5.
Maximum screw length = panel thickness + 2.2 mm.
The specified load capacities refer to the maximum value at 50,000 cycles.
The internal stops limit the cage. Provide external stops for a loaded system.
The head height of the mounting screws should not exceed a height of 0.9 mm, otherwise there is a risk of collision with other linear ball bearing parts.
Recommended screws: M 2.5.
Maximum screw length = panel thickness + 2.2 mm.
Temperature range
5 °C to 35 °C
Drawing reference
1) the rails with length 70 mm have no hole here
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
