Telescopic rail Over extension stainless steel naturel 21334-95-0508
- Latches in open position
- Quick frontal release
- Suitable for flat mounting
Unité de vente
€148.65 / Pcs.
hors TVA
Ajouté à votre panier
Désignation
Glissiére télescopique
Modèle 1
Super extension
Type de produit
standard
Matériau
du corps de base
acier inoxydable
Surface
du corps de base
naturel
B=Largeur
12,7
H=Hauteur
51,6
L=Longueur
508
A
15,9
A1
123,8
A2
203,2
A3
365,3
A4
412,8
A5
438,2
A6
463,6
A7
450,9
A8
438,2
Capacité de charge
par paire
en kg
90
Course
S
533
Montage
montage latéral
Référence
fabricant
DS3557-0020
Type de conditionnement
1 pièce = 1 paire
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Slides stainless steel 1.4301.
Ball cage stainless steel 1.4301.
Balls stainless steel 1.4034.
Version
Slides bright.
Ball cages bright.
Balls bright.
Ball cages bright.
Balls bright.
Note for ordering
Sold in pairs.
Note
On telescopic slides with over-extension, the travel is greater than the installed length. Latches in open position. When the release lever is actuated, the drawer can be taken out easily and separated from the guide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 400 mm and is based on the maximum value with 10,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 400 mm and is based on the maximum value with 10,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
Advantages
Latches in open position
Quick frontal release
Quick frontal release
Drawing reference
1) Mounting hole by 21334-95-0305 not provided
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
