Glissiére télescopique Extension partielle acier inoxydable naturel 21334-50-0650
- Latches in closed position
- Suitable for flat mounting
- Smooth running
Unité de vente
98,59 € / Pcs.
hors TVA
Ajouté à votre panier
Désignation
Glissiére télescopique
Modèle 1
Extension partielle
Type de produit
standard
Matériau
du corps de base
acier inoxydable
Surface
du corps de base
naturel
B=Largeur
9,5
H=Hauteur
35,34
L=Longueur
650
A
16
A1
32
A2
352
A3
384
A4
576
A5
608
A6
352
A7
384
A8
15,5
Capacité de charge
par paire
(80 000 cycles) en kg
41
Capacité de charge par paire
(10 000 cycles) en kg
43
Course
S
469
Montage
montage latéral
Référence
fabricant
DS2028-0065
Type de conditionnement
1 pièce = 1 paire
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Slides stainless steel 1.4301.
Ball cage stainless steel 1.4301.
Balls stainless steel 1.4034.
Version
Slides bright.
Ball cages bright.
Balls bright.
Ball cages bright.
Balls bright.
Note for ordering
Sold in pairs.
Note
On telescopic slides with partial extension, the travel is less than the installed length. Latches in closed position.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used.
The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 10,000 or 80,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used.
The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 10,000 or 80,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
Advantages
Latches in closed position
Suitable for flat mounting
Light running
Suitable for flat mounting
Light running
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
