Mandrel collet with lateral clamping structural steel black oxidised 03157-218053
- Particularly suitable for the finish machining of turned and milled parts
- For internal clamping
- Clamping without protruding edges
- Clamping contour adaptable by machining
Unité de vente
401,42 €
hors TVA
Ajouté à votre panier
Designation
Mandrel collet
Version 1
with lateral clamping
Form
B
Main
material
structural steel
Surface finish
body
black oxidised
Component
material
QT steel
Surface finish
component
tempered, hardened and PTFE-coated
D=Diameter min.
18
D=max. diameter
53,3
Application
machined
Clamping
force
max. kN
20
Clamping type
internal clamping
D1
53,3
D2
25
H
44,4
H1
25,4
H2
21
H3
45
SW
6
Tightening
torque
max. Nm
66
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
no
~ REACh SVHC 1 name > threshold
lead
~ RoHS conformity
yes, with exemption
~ RoHS exemption/s
III/6a-I
~ TSCA 6(H) conformity
yes
Description
Material
Mandrel mild steel.
Clamping screw carbon steel.
Clamping screw carbon steel.
Version
Mandrel black oxidised.
Clamping screw tempered to 10.9, hardened and PTFE coated.
Clamping screw tempered to 10.9, hardened and PTFE coated.
Note
Expand the mandrel approx. 0.1 mm over the relaxed diameter. Turn or mill the mandrel to suit the internal diameter of the workpiece. A locking ring is included for machining.
The shank or flange is centred in a reamed hole or pocket.
Form A is supplied with 6 fastening screws.
The shank or flange is centred in a reamed hole or pocket.
Form A is supplied with 6 fastening screws.
Assembly
The side lock make these mandrel collets ideal for finish machining parts with blind internal diameters. The diameter “D” can be turned or milled to suit the workpiece ID.
Manual tightening with hexagon socket wrench.
* D min. = smallest diameter to which “D” may be turned or milled.
Manual tightening with hexagon socket wrench.
* D min. = smallest diameter to which “D” may be turned or milled.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
