Anneau de levage QT steel 07752-20
- Load capacity up to 2,290 kg
- 5x safety factor
Unité de vente
€177.72
hors TVA
Ajouté à votre panier
Désignation
Anneau de levage
Modèle 2
à traction latérale
Matériau
du corps de base
acier de traitement
D=Filetage
M20
A
19,8
A1
23,8
B
41,3
B1
50,8
Couple de serrage en Nm
70
D1
25,4
H
39,7
H1
40,1
H2
2
H3
11,1
L
120,7
L1
82,6
R
38,1
S
12,7
SW
10
charge admissible
max.
en kg
2290
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Carbon steel.
Version
Black oxidised.
Note
Every swivel bale undergoes an additional visual inspection after load testing (5x safety factor).
A safety data sheet for installation is included with every swivel bale.
Do not use spacer washers between the bush flange and support beam.
Tighten the screws to the stated torque and check and re-tighten regularly. After installation check if the bale swivels and turns freely in all directions.
Lift with care! Avoid impacts!
In no event must the permissible load stamped on the swivel bale be exceeded.
A safety data sheet for installation is included with every swivel bale.
Do not use spacer washers between the bush flange and support beam.
Tighten the screws to the stated torque and check and re-tighten regularly. After installation check if the bale swivels and turns freely in all directions.
Lift with care! Avoid impacts!
In no event must the permissible load stamped on the swivel bale be exceeded.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
