Telescopic rail Over extension steel galvanised 21335-06-0500
- Over extension
- Smooth running
- High lateral stability with exact guidance
Unité de vente
236,56 € / Pcs.
hors TVA
Ajouté à votre panier
Désignation
Glissiére télescopique
Modèle 1
Super extension
Type de produit
standard
Matériau
du corps de base
acier
Surface
du corps de base
zingué
Matériau
des composants
acier
Surface
des composants
traitée
B=Largeur
38,2
H=Hauteur
53,1
L=Longueur
500
A
26
A1
192
A2
224
A4
384
A5
416
A6
160
Capacité de charge
par paire
en kg
100
Course
S
746
Montage
montage latéral
Référence
fabricant
DZ5351-0050
Type de conditionnement
1 pièce = 1 paire
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Slides steel.
Ball cages steel.
Balls, steel.
Ball cages steel.
Balls, steel.
Version
Slides galvanised.
Ball cages, galvanised.
Balls hardened.
Ball cages, galvanised.
Balls hardened.
Note for ordering
Sold in pairs.
Note
On telescopic slides with over-extension, the travel is greater than the installed length.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacities stated were determined for a rail spacing of 450 mm and refer to the maximum value after 20,000 cycles.
These telescopic slides are not suitable for horizontal installation.
The installation clearance between the cabinet and the drawer should be between +0.2 mm and +0.5 mm for a rail thickness of 38.2 mm.
It is recommended that the telescopic slides be secured using M5 countersunk screws.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacities stated were determined for a rail spacing of 450 mm and refer to the maximum value after 20,000 cycles.
These telescopic slides are not suitable for horizontal installation.
The installation clearance between the cabinet and the drawer should be between +0.2 mm and +0.5 mm for a rail thickness of 38.2 mm.
It is recommended that the telescopic slides be secured using M5 countersunk screws.
Temperature range
-20 °C to +70 °C.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
D'autres clients ont également acheté
