Wedge clamp double tool steel hardened 04527-1214
- Ideal for horizontal and vertical series clamping
- For high clamping forces
- Can be used both in a tapped hole and in a T-slot
- With positive down force
Unité de vente
€272.05
hors TVA
Ajouté à votre panier
Désignation
Mors de serrage
Modèle 1
double
Modèle 2
pour rainure en Té
Type de produit
placage étroit
Matériau
du corps de base
acier à outils
Surface
du corps de base
traitée
Matériau
des composants
acier à outils
Surface
des composants
trempé et bruni
B=Largeur
41
D=Filetage
M12X50
A
max.
49
A
min.
42
B1
30
C
36
Couple
de serrage
max. Nm
85
E
5
Force de serrage
kN max.
40
G
14
Type de fixation
rainure en T
Utilisation
pièces brutes
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Body and jaw segments tool steel.
Version
Body hardened.
Jaw segments hardened (49-51 HRC) and black oxidised.
Wedge faces ground.
Jaw segments hardened (49-51 HRC) and black oxidised.
Wedge faces ground.
Note
Because of their compact design, the double wedge clamps are especially suitable for horizontal and vertical multiple clamping. The hardened and ground wedge surfaces make high clamping forces possible.
Optionally, the appropriate wedge clamp can be mounted either in a grid hole or T-slot. Inserting a socket head screw DIN 912 moves the two clamping segments outwards and presses the workpieces against a fixed stop.
The so-called “draw-down effect” is caused by the double wedge of this version.
Travel acc. to order No.:
04527-12 = ±1.0 mm
04527-16 = ±1.5 mm
Optionally, the appropriate wedge clamp can be mounted either in a grid hole or T-slot. Inserting a socket head screw DIN 912 moves the two clamping segments outwards and presses the workpieces against a fixed stop.
The so-called “draw-down effect” is caused by the double wedge of this version.
Travel acc. to order No.:
04527-12 = ±1.0 mm
04527-16 = ±1.5 mm
Drawing reference
D) DIN 912 cap screw
1) Wedge clamps
2) Workpiece
3) Fixed stop
1) Wedge clamps
2) Workpiece
3) Fixed stop
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
