Wedge clamp with fixed jaw mild steel hardened and phosphated 04451-0500512
- Suitable for series clamping
- For high clamping forces
- For use in T-slots
- Flexible and unrestricted clamping possible
- Tolerance compensation possible with elongated hole
Unité de vente
€448.93
hors TVA
Ajouté à votre panier
Désignation
Mors de serrage
Modèle 1
à mors fixe
Modèle 2
à une oreille
Forme
E
Type de forme
avec pointes
Matériau
du corps de base
acier de cémentation
Surface
du corps de base
trempé et phosphaté
B=Largeur
50
H=Hauteur
25
B1
30
B2
18
B3
5H7
C
alésage traversant pour
vis à tête cylindrique DIN 912
M12
Couple
de serrage
max. Nm
85
Force de serrage
kN max.
30
G
Vis à tête cylindrique
DIN 912
M12x30
H1
12,5
H3
3,5
H4
5
H5
9
H6
4,75
L
max.
104
L
min.
98
L1
2,5
Taraudage
D
M5
Z
Vis à tête cylindrique
DIN 912
M12x25
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Product description
The functioning principle make the wedge clamps ideal for multi-clamping.
The wedge shape creates high clamping forces.
These wedge clamps set into a T-slot for clamping.
Tightening the clamping screw moves the clamping segments outwards and presses the workpiece against the fixed jaws of the machining fixture.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.
Displacement: M12 = ±1.0 mm, M16 = ±1.5 mm.
The wedge shape creates high clamping forces.
These wedge clamps set into a T-slot for clamping.
Tightening the clamping screw moves the clamping segments outwards and presses the workpiece against the fixed jaws of the machining fixture.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.
Displacement: M12 = ±1.0 mm, M16 = ±1.5 mm.
Material
Double wedge and clamping segments mild steel.
Version
Double wedge and clamping segments hardened, phosphated.
Note
The two screw-on holes in the clamping faces also enable seating ledges to be mounted so as to optimise the clamping depth of the workpieces.
Scope of delivery
Wedge clamps
Fastening screws.
Fastening screws.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
