Telescopic rail Full extension steel galvanised 21335-15-0559
- Latches in closed position
- Quick frontal release
- Suitable for flat mounting
Unité de vente
119,67 € / Pcs.
hors TVA
Ajouté à votre panier
Désignation
Glissiére télescopique
Modèle 1
Extension intégrale
Type de produit
standard
Matériau
du corps de base
acier
Surface
du corps de base
zingué
B=Largeur
19,1
H=Hauteur
70,8
L=Longueur
558,8
A
31,8
A10
328,7
A11
389
A12
414,4
A13
433,4
A14
452,5
A3
438,2
A4
454,2
A5
495,3
A6
108
A7
171,5
Capacité de charge
par paire
en kg
160
Course
S
558,8
Montage
montage latéral
Référence
fabricant
DZ7957-0022-2
Type de conditionnement
1 pièce = 1 paire
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Slides steel.
Ball cages steel.
Balls, steel.
Ball cages steel.
Balls, steel.
Version
Slides galvanised.
Ball cages, galvanised.
Balls hardened.
Ball cages, galvanised.
Balls hardened.
Note for ordering
Sold in pairs.
Note
By telescopic slides with full extension, the travel is roughly equal to the installed length, which ensures greater comfort and accessibility. Latches in closed position. When the release lever is actuated, the drawer can be taken out easily and separated from the guide. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacities specified refer to the maximum value for 80,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
Suitable for a slide spacing up to 1,000 mm.
The load capacity is ca. 75% lower by horizontal mounting.
Suitable for a slide spacing up to 1,000 mm.
Temperature range
-20 °C - +70 °C.
Advantages
Latches in closed position
Quick frontal release
Suitable for flat mounting
Quick frontal release
Suitable for flat mounting
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.