Metal bellows coupling Clamping with grub screw aluminium 23002-0060
- Very high torsional stiffness
- Exact angle of rotation transmission
- Clamping with threaded pins ensures markedly shorter assembly times
- Low moment of inertia
Unité de vente
€142.08
hors TVA
Ajouté à votre panier
Désignation
Accouplement à soufflet metallique
Modèle 1
Serrage par vis HC
Matériau
du corps de base
aluminium
Matériau
des composants
acier inoxydable
D1/D2=alésage de fixation
6
D4=Damètre extérieur
35
L=Longueur
54
C
(DIN 916)
M5
Couple
d’inertie
(10⁻³ kgm²)
0,016
Couple de
serrage des
vis en Nm
8
Couple nominal
en Nm
6
D1/D2
min.
6
D1/D2
max.
20
L1
29
L2
4,3
Rigidité à la torsion
(10⁻³ Nm/arcmin)
1100
Taille
6
décalage latéral
max.
de l’arbre
0,25
décalage latéral
max.
de l’arbre ±
0,6
rigidité
axiale du ressort
N/mm
45
rigidité
latérale du ressort
N/mm
60
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Hub aluminium.
Bellows stainless steel.
Bellows stainless steel.
Version
Bright.
Note
Clamping the hub with a grub screw is a cost-effective alternative to the metal bellows couplings with radial clamping hub (23000). Short mounting times and an easy installation even in difficult to reach places. Take note of the required tightening torque for the grub screw. To ease removal, a flat milled on the shaft is recommended.
Assembly
The shaft to hub bore fit should be a transition fit. The play should be min. 0.01 mm and max. 0.04 mm. i.e:
shaft Ø 5 k6
bore Ø 5 G7.
Bores smaller than D1/D2 min. are possible, however an optimal transfer of the nominal torque is no longer guaranteed.
As the metal bellows are made of thin stainless steel plate, special care should be taken during installation and removal. Damages to the bellows can render the coupling unusable.
shaft Ø 5 k6
bore Ø 5 G7.
Bores smaller than D1/D2 min. are possible, however an optimal transfer of the nominal torque is no longer guaranteed.
As the metal bellows are made of thin stainless steel plate, special care should be taken during installation and removal. Damages to the bellows can render the coupling unusable.
On request
Hub bores D1 and D2 with separate tolerance class or range.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
