Roulement auto-aligneur acier à roulement 24230-55211
- Inside rings for easier fastening
- Internal diameter with plus-tolerance
- Lubricated for entire service life
Unité de vente
€43.82
hors TVA
Ajouté à votre panier
Désignation
Roulement auto-aligneur
Modèle 2
UC
Matériau
du corps de base
acier à roulement
Matériau
des composants
PTFE
LA=Palier
UC 211
A
33,4
A1
22,2
A2
10
A3
7
Capacité de charge
dynamique
kN
33,37
Capacité de charge
statique
kN
25,11
D
55
D1
70
D2
100
L1
55,6
L2
25
Vis sans tête
M10x1,25
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
no
~ PFAS substance/s
PTFE
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Description
Material
Ball-bearing steel 100Cr6.
Seal, rubber NBR.
Seal, rubber NBR.
Version
Sealed on both sides with a spherical outer ring.
Can be re-lubricated.
Can be re-lubricated.
Note
The internal construction of the insert bearings corresponds to that of standard Series 6200 and 6300 radial ball bearing. However, they have wider inner rings for easier fastening on shafts. The inner rings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with h-tolerances. The shaft is secured by 2 grub screws positioned 120° apart on the inner ring.
The insert bearings are ready to install and are permanently lubricated with a suitable ball bearing grease. In normal applications, re-lubrication is not necessary.
The insert bearings are ready to install and are permanently lubricated with a suitable ball bearing grease. In normal applications, re-lubrication is not necessary.
Temperature range
-15 °C to +100 °C.
Remarque importante concernant le téléchargement des modèles CAO
Pour pouvoir télécharger nos modèles CAO, vous devez d’abord connecter. Si vous n’avez pas encore créé de compte, inscrivez-vous en cliquant sur « Mon compte » (à droite de l’écran) et suivez les instructions.
Other customers also bought
